Find timber boat ads in our Motorboats & Powerboats category from New South Wales. . Transom is in good condition with no delamination. . Ropes Water anchor Vests 1 person & 2 person tubes Tandem trailer 11 months rego on boat and trailer Timber rear ski deck Boat cover Great family boat Approximately 600 hrs
Bad jokes have been published of a prospective buyer falling through a deck or into the bilge. These visions and jokes ring somewhat true sometimes, but does a delamination problem predict the end of a good old boat? Is there useful life after delamination? Let's examine the causes, effects, and eventually the cure for this..
Feb 23, 2013 . Not having seen the boat my assessment could be off, but I think your best bet may be to just reinforce the mast step. If the hull and deck are solid enough to not fall apart when sailing, you will have a recreational use boat. In this forum you will find, if you have not already, instructions for installing a port and..
May 10, 2017 . Fiberglass materials remained expensive, and as demand for these new boats increased, manufactures began cutting costs to compete in the marketplace. Soon a layer of wood was added to lighten and strengthen the hulls and decks. The fiberglass and wood sandwich was a great combination until one..
When soft or spongy, the deck may give a bit here and a bit there allowing the hull sides to flex. I am certainly not shipwright but this is an obvious problem to me, and even just minor flexing will cause undo stress on all joints in a boat. Delimitation Sample. The lower image shows the top layer delaminated from the wooden..